#Asus p7h55 with pc3 10600 memory upgrade#

So now I have 2 hdwe issues rather than 1. These HDD's were IDE and I scored some IDE to SATA adapters and made all the connections, but apparently something is wrong. You have just discovered a place that sells Asus P7H55-M LE Desktop Motherboard H55 Socket LGA 1156 i3 i5 i7 DDR3 16G ATX UEFI BIOS Original Used Mainboard On Sale for RM521, which is 8 cheaper than current prices elsewhere. Since I was in the BIOS, I went into the 'Boot' menu and made changes to the 'boot device priority', and was alarmed to see that 2 of the HDD's were not recognized, 1 of which has the OS loaded. Asus P7P55-M P55 Socket Currently I have a stable overclock at 3.6Ghz (3600MHz x 20), but there seems to be some sort of power saving going on, the vCore keeps dropping from 1.216 to 1.080 and the freq down to 1620MHz x 9. Prior to booting up with the PCI-E card, I hooked up the remaining 3 HDD's. Crucial 4GB (2x2GB) DDR3 1333MHz/PC3-10600 Memory Kit CL9 1.5V. However, I then powered down and changed the mobo cable from the PCI-E card to the mobo VGA connection and booted up.to a blank screen with the same prior message of '1d-sub no signal'.

I cockroached (Hawaiian slang for procured) a PCI-EX16 video card from a techie friend and was able to enter the BIOS and change the 'chipset>uncore configuration>initiate Graphic Adapter' and changed the Lynnfield CPU config to PCI/PCIE. Many mahalos-n-aloha from the big Island of Hawaii, Nothing said about possibly giving me some guidance as to mobo jumpers or some other type of error I might have made.

#Asus p7h55 with pc3 10600 memory upgrade#

This number is calculated as a percentage of all motherboards, compatible with both original and upgrade CPUs, compared to the number of motherboards, that support the original Intel i7-875K. I've contacted ASUS tech help and they suggested I purchase either a new CPU or a new graphics card. 'Upgrade Chance' is a probability of a successful processor upgrade/downgrade from the Core i7-875K (original CPU) to a specific model. When powered up the monitor displays a small screen saying '1 d-sub - no signal'. The monitor's On-Board Display was set to make VGA as the default signal mode. The VGA cable and monitor were tested on another system immediately prior to hooking them up to the new system. This monitor has both VGA and DVI-D (dual link) connections. I hooked up a NEC AccuSync LCD92VX monitor. The MOBO has both VGA and DVI-D (dual link) on-board video connections. I installed the HD with the OS WINXPSP3-home on it, No other HD's or Optical drives or PCI cards have yet been installed. The system came with 2GB of DDR3-1333 (PC3-10600) RAM and I added another 2GB of the same memory. 4GB RAM MEMORY Asus P7H55-M/USB3 (DDR3-10600 - Non-ECC) Motherboard Memory - EUR 27,91. Bonjour, Le problГЁme est 'simple' Jai une carte mГЁre Asus P7H55 USB3 jai achetГ© des barrettes mГ©moire Kingston 4go ddr3 valueram en 12800 Mhz et la carte ne supporte que du 10600 On a tester avec des 10600 ca marche mais avec les. The system came with an ASUS P7H55-M LX mobo, to house the Intel Core i5 760 (4 x 3.33GHz CPU - 8MB Cache) I ordered as an upgrade. I recently purchased a bare bones system from an online e-tailer.